1. Host Features

-The molding process uses a high-pressure filter-press molding process, which can comprehensively improve product quality and strength while ensuring rapid production;

-The equipment is fully controlled by PLC, which can control all the actions, oil circuit and gas circuit system of the equipment through the computer, reduce labor costs and improve production efficiency;

- Lifting mold frame, without changing the mold, by adjusting the limit of the frame, curbstone products of different thicknesses can be produced;

-The main oil cylinder, base, guide post and other frame parts of the main engine are all made of integral castings, which can greatly extend the life of the main engine. Under natural conditions, the casting parts can be guaranteed for 20 years;

2. Mold Features

- The mold is the combined structure of the mold core, frame, liner and socket, which is easy to repair and replace

- The main parts of the mold are made of integral casting materials, and the service life of the mold is long

- The upper indenter and the lower core are provided with drainage holes and auxiliary drainage grooves, which is convenient for quickly filtering out water during the molding process

- The pressure head and mold core are equipped with a removable filter layer for filtering mud, which is easy to remove, wash and replace

3. Forming process description

- MYL series concrete forming machine, the forming process used is a forming process used to form concrete slurry by high pressure. It is characterized in that in the pressing process, the water in the slurry can be extruded so that the green body can be rapidly formed and demolded, and in the process of extruding the water, the concrete slurry can be locked so that it will not be lost together with the water. to preserve the strength of the finished product.

The advantage of this process is that it can be pressed with wet concrete slurry, the finished product has fewer pores, and has a relatively good degree of bonding between cement and sand; at the same time, it has a looser ratio in moisture control than dry and hard. (15%-20%, dry hardness 6%-8%); at the same time, vibration is not involved in the molding process, so the noise during mechanical work is small.