The reason why the burn-free brick machine equipment can produce a variety of styles of brick products is because of the credit of molds. The maintenance skills of the burn-free brick machine and the quality of the mold directly affect the quality of the brick products. Therefore, the mold process adopts the injection and heat treatment process to produce a mold with uniform upper and lower mold gaps.In this way, more styles of brick products can be produced.Next, Dongchen Machinery Xiaobian will mainly share with you the mold technology and use skills of the brick-free machine equipment.

The mold technology of the burn-free brick machine equipment has certain requirements for the operators, and the staff should have certain knowledge of the brick machine in terms of mold materials, replacement, and operation.

First of all, the mold of the brick-free machine equipment adopts a unique combination mold structure, such as presser feet, wear and tear, and parts need to be replaced to save mold expenses.During the equipment test, first add gear oil to the reducer as required, and inject lubricating oil into each lubricating part to test whether the power supply meets the electrical requirements (three-phase 380V). After the inspection is correct, turn on the power supply, and first debug whether the mold box and the die head go up and down freely to see if there is any stuck friction and other phenomena. If necessary, adjust the maintenance skills of Leishi Chengxin equipment for the brick-free machine until it is free to go up and down.

In the process of mold work, the staff needs to debug the mold, and release the mixer after the material is stirred, and then start the motor on the brick-free machine equipment, stop when the lifting reaches the bite of the two hooks, put the suitable wooden pallet on the vibrating platform, and then start the lifting motor, drop the mold box on the wooden pallet to stop, and then shovel the stirred material into the mold box with a shovel. After the material is sufficient, start the vibration for 3 to 5s to stop, and then use the material target to flatten the mold box, pull the excess material to the ground with a rake, pull down the decoupling handle, and the die head is free. Fall, start the upper and lower vibration motors, etc. The limit cards on both sides are stuck in to stop the vibration, and when the residual vibration is completely gone, start the lifting motor, wait for the hook to bite the motor to stop, and transport the finished burn-free bricks together with the pallet with a forklift. The cycle is completed.

A mold is a tool used to shape an article. This tool is composed of various parts. Different molds are composed of different parts. It mainly realizes the processing of the shape of the article through the change of the physical state of the molded material.The molds selected for the brick-free machine equipment have the characteristics of wear resistance, durability, and oxidation resistance. Therefore, after the use is over, the staff is also required to clean up the molds in time, lubricate the molds regularly, and apply some lubricating oil frequently to prevent rust. To extend the service life of the mold itself.

There are many choices of molds for the equipment of the burn-free brick machine, and each test machine needs to be checked in advance before it can be operated.In daily use, the maintenance skills of Leishi Chengxin equipment of the brick-free machine Leishi Chengxin are very familiar to the operators. Only continuous maintenance of the mold and improvement of the operation process can improve its service life.