Correct operating procedures for cement color tile machine：

1. Before the automatic cement color tile machine equipment is turned on, first check whether the equipment and electrical appliances are good, and the power supply should be cut off when you get off work.

2. When the automatic cement color tile machine equipment is running, shovels or other items shall not be inserted into the mixer.

3. Each time the mixing time of the automatic cement color tile machine equipment is not less than 120 seconds.

Fourth, operators should pay attention to the safety of the operating environment.Such as the hopper, the position of the discharge port, etc.

5. Non-operators are not allowed to operate casually.

6. According to the moisture content of yellow sand, adjust the amount of water added to each machine to make the mixture moist and suitable.

7. If the operator needs to enter the mixer for inspection, the power supply must be cut off and someone must be set up to monitor it.

8. Make stirring records according to the matching ratio notice.

9. Operators should carefully fill in the operation records on duty.

10. Clean up the excess materials in the equipment of the automatic cement color tile machine and the conveyor belt in time after shift and wash them clean to keep the surroundings hygienic and clean.